Is my course accredited?

The Institution supports educational bodies (Universities and Colleges) which deliver courses for the training of professional designers by accrediting the courses that these bodies offer.

The course accreditation procedure involves a thorough assessment of the course documents, assessment procedures and teaching facilities by a panel of knowledge experts. The panel also meets with both lecturers and current students during the course of the assessment.

Accredited courses are fully supported by the Institution, and IED Student membership is free to full-time students for the duration of their studies. Successful students can upgrade to Member upon graduation.

The following courses have satisfied the IED accreditation criteria and further information can be obtained through the contacts below.

Please do note however that the below list is not exhaustive. If you would like us to check whether your course can be accredited, but it isn’t on the list below get in touch by emailing Jo@ied.org.uk.

Engineering Council - Mutual Recognition

Please be aware that for Engineering Council (EngC) registration, any course that is accredited by any other Professional Engineering Institution is also accepted by the IED and vice versa.

UniversityTypeCourseAccreditationAwardCourse Contact
ANGLIA RUSKIN UNIVERSITY3 Yrs FT
4 Yrs PT
BSc (Hons) Computer Aided Product Design2002 - 2006MembershipJ.S.Bowman@anglia.ac.uk
ANGLIA RUSKIN UNIVERSITY2 Yrs FTHND Computer Aided Product Design2002 - 2006MembershipJ.S.Bowman@anglia.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Product Design2006 - 2022Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Transport Product Design2014 - 2022Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Management2014 - 2022Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY1 Yr FTMSc Product Design2018 - 2022Membership and further learning towards CTPDe.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Design Engineering2006 - 2018Membership and partially meets the requirements for CEng registratione.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Automotive Product Design2006 - 2013Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Design Management2006 - 2013Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Engineering Product Design2006 - 2013Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Medical Product Design2006 - 2013Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Sustainable Product Design2010 - 2011Membership and RProdDese.mackie2@aston.ac.uk
ASTON UNIVERSITY1 Yr FTMSc Product Design Enterprise2010 - 2018Membership and further learning towards CEng registratione.mackie2@aston.ac.uk
ASTON UNIVERSITY1 Yr FTMSc Product Design Innovation2009 - 2018Membership and further learning towards CEng registratione.mackie2@aston.ac.uk
UNIVERSITY OF BATH3 Yrs FT
4 Yrs SW
BEng (Hons) Integrated Design Engineering2014 – 2023Membership and further learning towards CEng registrationj.darling@bath.ac.uk
UNIVERSITY OF BATH4 Yrs FT
5 Yrs SW
MEng (Hons) Integrated Design Engineering2014 – 2023Membership and CEng registrationj.darling@bath.ac.uk
BOURNEMOUTH UNIVERSITY2 Yrs PTMEng (Hons) Engineering2012 - 2023Membership and CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Mechanical Engineering2016 - 2023Membership and CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITYBA (Hons) Product Design1990 - 2013Membershippsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BA (Hons) Product Design2014 - 2023Membership and RProdDespsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design2014 - 2018Membership and RProdDespsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY2 Yrs PT
3 Yrs FT
4 Yrs SW
BEng (Hons) Engineering2012 - 2023Membership, IEng registration and partially meets the further learning requirements towards CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITYBSc (Hons) Product Design1990 - 2013Membershippsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design2014 - 2023Membership and RProdDespsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY1 Yr FT
2 Yrs PT
BSc (Hons) Design Engineering (Top up)2010 - 2023Membership and IEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Computer Aided Product Design now renamed 'BSc (Hons) Design Visualisation'2005 - 2012Membership and RProdDespsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Design Engineering2000 - 2006Membershippsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Design Engineering2006 - 2023Membership and IEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Advanced Technology Business Innovation2010 - 2014Membership and IEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY2 Yrs FTDesign Studies (Design Engineering Bridging Programme2009 - 2015Membership and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITYMDes Product Design2015 - 2017Membership and CTPDpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY4 Yrs PT
4 Yrs FT
5 Yrs SW
MEng (Hons) Mechanical Engineering2016 - 2023Membership and CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITYI Yr FTMSc Design Engineering2010 - 2014Membership and meets the further learning requirements towards CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY1 Yr FTMSc Engineering Design Innovation2010 - 2014Membership and meets the further learning requirements towards CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITY1 Yr FT
2 Yrs PT
MSc Mechanical Engineering Design2014 - 2023Membership and meets the further learning requirements towards CEng registrationpsewell@bournemouth.ac.uk
BOURNEMOUTH UNIVERSITYMSc Product Design2015 - 2017Membership and CTPDpsewell@bournemouth.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs FT
3 Yrs PT
FdEng Engineering (Mechanical Design)2014 - 2023Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs FT
3 Yrs PT
FdEng Engineering (Manufacturing Management)2014 - 2023Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs FT
3 Yrs PT
FdEng Engineering (Electronic Design)2014 - 2023Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs FT
3 Yrs PT
FdEng Engineering (Marine Technologies)2018 - 2023Membership, EngTech registration and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs FT
3 Yrs PT
FdSc Engineering (Mechanical Design)2009 - 2018Membership and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs FT
3 Yrs PT
FdSc Engineering (Manufacturing Management)2009 - 2018Membership and partially meets the academic requirements for IEng registration subject to further appropriate learning to degree levelwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs PT
1 Yr FT
HNC Engineering (Mechanical Design)2014 - 2023Membership and EngTech registrationwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs PT
1 Yr FT
HNC Engineering (Manufacturing Management)2014 - 2023Membership and EngTech registrationwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs PT
1 Yr FT
HNC Engineering (Electronic Design)2014 - 2023Membership and EngTech registrationwhitemj@bpc.ac.uk
BOURNEMOUTH & POOLE COLLEGE2 Yrs PT
1 Yr FT
HNC Engineering (Marine Technologies)2018 - 2023Membership and EngTech registrationwhitemj@bpc.ac.uk
UNIVERSITY OF BRIGHTON3 Yrs FTBSc (Hons) Product Design2010 - 2022Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON4 Yrs FTBSc (Hons) Product Design with Professional Experience2007 - 2022Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON3 Yrs FTBSc (Hons) Product Design Technology2013 - 2022Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON4 Yrs FTBSc (Hons) Product Design Technology with Professional Experience2008 - 2022Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON3 Yrs FTBSc (Hons) Sports Product Design2013 - 2022Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON4 Yrs FTBSc (Hons) Sports Product Design with Professional Experience2008 - 2022Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON3 Yrs FTBSc (Hons) Design Technology2002 - 2006MembershipR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON3 Yrs FTBSc (Hons) Sports Technology2002 - 2006MembershipR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON3 Yrs FTBSc (Hons) Sustainable Product Design2007 - 2015Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRIGHTON4 Yrs FTBSc (Hons) Sustainable Product Design with Professional Experience2013 - 2015Membership and RProdDesR.D.Morris@bton.ac.uk
UNIVERSITY OF BRISTOL3 Yrs FTBEng (Hons) Engineering Design2008 - 2023Membership and partially meets the further learning requirements towards CEng registrationPaul.harper@bristol.ac.uk
UNIVERSITY OF BRISTOL4 Yrs SWBEng (Hons) Engineering Design with Study in Industry2008 - 2023Membership and partially meets the further learning requirements towards CEng registrationPaul.harper@bristol.ac.uk
UNIVERSITY OF BRISTOL4 Yrs FTMEng (Hons) in Engineering Design2008 - 2023Membership and CEng registrationPaul.harper@bristol.ac.uk
UNIVERSITY OF BRISTOL5 Yrs SWMEng (Hons) Engineering Design with Study in Industry2001 - 2023Membership and CEng registrationPaul.harper@bristol.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
4 Yrs SW
BA Industrial Design and Technology2001 - 2005MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FTBA (Hons) Industrial Design and Technology2006 - 2011MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FTBA (Hons) Industrial Design and Technology2012 - 2016Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs SWBA (Hons) Industrial Design and Technology with Professional Practice2012 - 2016MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
4 Yrs SW
BSc Industrial Design2001 - 2005MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design2006 - 2011Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
4 Yrs SW
BSc Industrial Design Engineering2001 - 2005MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
4 Yrs SW
BSc Product Design2001 - 2005MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FTBSc (Hons) Product Design2006 - 2011Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FTBSc (Hons) Product Design2012 - 2016Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs SWBSc (Hons) Product Design with Professional Practice2012 - 2016Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
4 Yrs SW
BSc Virtual Product Design2004 - 2008Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FTBSc Product Design Engineering2006 - 2011Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FTBSc Product Design Engineering2012 - 2016Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs SWBSc (Hons) Product Design Engineering with Professional Practice2012 - 2016Membership and RProdDesStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON1 Yr FT
3 Yrs PT
MA Design and branding Strategy2012MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON1 Yr FT
3 Yr PT
MA Design Strategy and Innovation2012MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON3 Yrs FT
3 Yr PT
MEng Mechanical Engineering and Design2001 - 2005MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON1 Yr FT
2-4 Yrs PT
MSc Human Centred Design2009 - 2011MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON1 Yr FT
2-4 Yrs PT
MSc Integrated Product Design2009 - 2011MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON1 Yr FT
2-4 Yrs PT
MSc Integrated Product Design2012 - 2016MembershipStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWBA (Hons) Industrial Design and Technology2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWBA (Hons) Industrial Design and Technology (with professional experience)2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWBSc (Hons) Product Design2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWBSc (Hons) Product Design (with professional experience)2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWBSc (Hons) Product Design Engineering2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWBSc (Hons) Product Design Engineering (with professional experience)2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDStuart-Gabrielson@brunel.ac.uk
BRUNEL UNIVERSITY LONDON4 Yrs FT/SWMSc Integrated Product Design2017 - 2021Membership and CTPDStuart-Gabrielson@brunel.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBA (Hons) Product Design2009 - 2013Membership and RProdDesLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBA (Hons) Product Design2014 - 2018Membership and RProdDesLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs PTBEng (Hons) Mechanical Engineering Design2002 - 2008Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs PTBEng (Hons) Mechanical Engineering Design2009 - 2013Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs PTBEng (Hons) Mechanical Engineering Design2002 - 2014Membership, IEng registration and partially meets the requirements for CEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs PTBEng (Hons) Mechanical Engineering Design2015 - 2020Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Computer Aided Design2002 - 2007Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Product Design2002 - 2007Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Computer Aided Design with Computing2002 - 2007Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Computer Aided Design with Multimedia2002 - 2007Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Product Design with Multimedia2002 - 2007Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Product Design2009 - 2013Membership and RProdDesLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs FTBSc (Hons) Product Design2014 - 2018Membership and RProdDesLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY3 Yrs PTFDSc Engineering (Mechanical Engineering)2009 - 2013Membership, EngTech registration and partially meets the requirements for IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY2 Yrs PTHNC Mechanical Engineering Design2010 - 2013Membership and EngTech registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY4 Yrs PTMEng Mechanical Engineering Design2008 - 2013Membership and CEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY1 Yr FTMSc Engineering Management and Design2009 - 2013Membership with further learning towards CEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY4-6 Yrs PTBEng (Hons) Engineering Design (Mechanical Enginering)2017 - 2021Membership and IEng registrationLyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY4-6 Yrs PTBEng (Hons) Engineering Design (Electrical Engineering)2017 - 2021Membership and IEng registration (subject to output as not yet delivered)Lyndon.buck@bucks.ac.uk
BUCKINGHAMSHIRE NEW UNIVERSITY4-6 Yrs PTBEng (Hons) Engineering Design (Production Engineering)2017 - 2021Membership and IEng registration (subject to output as not yet delivered)Lyndon.buck@bucks.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FT/PTBA (Hons) Product Design2010 - 2021Membership and RProdDescwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FT/PTBSc (Hons) Product Design2010 - 2021Membership and RProdDescwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY1 Yr FT
2 Yrs PT
MSc Product Design2019 - 2023Membership and further learning towards CTPDcwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FTBSc (Hons) Computer Aided Product Design2002 - 2009Membershipcwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FTBA (Hons) Multimedia Product Design2002 - 2009Membership and RProdDescwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FT
6 Yrs PT
BA (Ord) Product Design2010 - 2011Membership and RProdDescwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FT
6 Yrs PT
BSc (Ord) Product Design2010 - 2011Membership and RProdDescwatkins@cardiffmet.ac.uk
CARDIFF METROPOLITAN UNIVERSITY3 Yrs FTBSc (Hons) Product Design and Technology (Mechanics and Electronics)2002 - 2004Membershipcwatkins@cardiffmet.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE3 Yrs FTBEng (Hons) Computer Aided Engineering2006 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs SWBEng (Hons) Computer Aided Engineering with Industrial Placement2006 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE3 Yrs FTBEng (Hons) Mechanical Engineering2013 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs SWBEng (Hons) Mechanical Engineering with Industrial Placement2013 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE3 Yrs FTBEng (Hons) Motor Sports Engineering2006 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs SWBEng (Hons) Motor Sports Engineering with Industrial Placement2006 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE3 Yrs FTBEng (Hons) Engineering Development2011 - 2015Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs SWBEng (Hons) Engineering Development with Industrial Placement2011 - 2015Membership, IEng registration and partially meets the requirements for CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs FTMEng (Hons) Computer Aided Engineering2006 - 2020Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE5 Yrs SWMEng (Hons) Computer Aided Engineering with Industrial Placement2006 - 2020Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs FTMEng (Hons) Mechanical Engineering2013 - 2020Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE5 Yrs SWMEng (Hons) Mechanical Engineering with Industrial Placement2013 - 2020Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs FTMEng (Hons) Motor Sports Engineering2006 - 2020Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE5 Yrs SWMEng (Hons) Motor Sports Engineering with Industrial Placement2006 - 2020Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE4 Yrs FTMEng (Hons) Engineering Development2011 - 2015Membership and CEng registrationcenquiries@uclan.ac.uk
UNIVERSITY OF CENTRAL LANCASHIRE5 Yrs SWMEng (Hons) Engineering Development with Industrial Placement2011 - 2015Membership and CEng registrationcenquiries@uclan.ac.uk
COVENTRY UNIVERSITY3 Yrs FTMDes/BSc (Hons) Industrial Product Design2000 - 2009MembershipKieran Mason arx245@coventry.ac.uk
CRANFIELD UNIVERSITY1 Yr FT
up to 5 Yrs PT
MSc Global Product Development & Management2012 - 2018CEng with further learningf.j.charnley@cranfield.ac.uk
UNIVERSITY OF DERBY3 Yrs FTBA (Hons) Product Design2006 - 2020Membership and RProdDesm.veveris@derby.ac.uk
UNIVERSITY OF DERBY3 Yrs FTBSc (Hons) Product Design Engineering2016 - 2020Membership and RProdDesm.veveris@derby.ac.uk
UNIVERSITY OF DERBY3 Yrs FTBSc (Hons) Design Technology2006 - 2010Membership and RProdDesm.veveris@derby.ac.uk
UNIVERSITY OF DERBY3 Yrs FTBSc (Hons) Product Design2011 - 2015Membership and RProdDesm.veveris@derby.ac.uk
UNIVERSITY OF DERBY3 Yrs FTBSc (Hons) Product Design, Innovation & Marketing2006 - 2010Membership and RProdDesm.veveris@derby.ac.uk
DE MONTFORT UNIVERSITY3 Yrs FT
4 Yrs SW
BA (Hons) Furniture Design2013 - 2017Membership and RProdDessmlawson@dmu.ac.uk
DE MONTFORT UNIVERSITY3 Yrs FT
4 Yrs SW
BA (Hons) Product Design & Furniture Design2013 - 2022Membership and RProdDessmlawson@dmu.ac.uk
DE MONTFORT UNIVERSITY3 Yrs FT
4 Yrs SW
BA (Hons) Product Design2013 - 2022Membership and RProdDessmlawson@dmu.ac.uk
DE MONTFORT UNIVERSITY4 Yrs SW
8 Yrs PT
BSc (Hons) Industrial Design (Engineering)1997 - 2001Membershippbford@dmu.ac.uk
DE MONTFORT UNIVERSITY4 Yrs SW
8 Yrs PT
BSc (Hons) Industrial Design2002 - 2007Membership and RProdDespbford@dmu.ac.uk
DE MONTFORT UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design2008 - 2022Membership, IEng registration and ProdDespbford@dmu.ac.uk
DE MONTFORT UNIVERSITY3 Yrs FT
4 Yrs SW
MDes Design Products2013 - 2022Membership and RProdDessmlawson@dmu.ac.uk
DUBLIN INSTITUTE OF TECHNOLOGY4 Yrs FTBSc (Hons) Product Design2003 - 2021Membership and RProdDesger.reilly@dit.ie
UNIVERSITY OF EAST LONDON3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design1998 - 2005Membershipa.j.slawson@uel.ac.uk
EDINBURGH NAPIER UNIVERSITY3 Yrs FTBDes (Hons) Consumer Product Design2005 - 2009Membershipj.shackleton@napier.ac.uk
EDINBURGH NAPIER UNIVERSITY4 Yrs FTBSc/BSc (Hons) Product Design Engineering2002 - 2007Membership and IEng registrationj.shackleton@napier.ac.uk
EDINBURGH NAPIER UNIVERSITY3 Yrs FTBSc Industrial Design2001 - 2004Membershipj.shackleton@napier.ac.uk
EDINBURGH NAPIER UNIVERSITY3 Yrs FTBSc Product Design Engineering2008 - 2013Membership and RProdDesj.shackleton@napier.ac.uk
EDINBURGH NAPIER UNIVERSITY3 Yrs FTBSc Product Design Engineering2014 - 2015Membership and RProdDesj.shackleton@napier.ac.uk
EDINBURGH NAPIER UNIVERSITY4 Yrs FTBSc (Hons) Product Design Engineering2008 - 2013Membership and IEng registrationj.shackleton@napier.ac.uk
EDINBURGH NAPIER UNIVERSITY4 Yrs FTBSc (Hons) Product Design Engineering2014 - 2015Membership and IEng registrationj.shackleton@napier.ac.uk
UNIVERSITY OF GLAMORGAN3 Yrs FT
4 Yrs SW
BA (Hons) Product Design2002 - 2006Membershipjhills@glam.ac.uk
UNIVERSITY OF GLAMORGAN3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design2002 - 2006Membershipjhills@glam.ac.uk
UNIVERSITY OF GLASGOW4 Yrs FTBEng Mechanical Design Engineering2006 - 2019Membership, IEng registration and partially meets the requirements for CEng registrationc.whittet@gsa.ac.uk
UNIVERSITY OF GLASGOW4 Yrs FTBEng (Hons) Product Design Engineering2006 - 2019Membership, IEng registration and partially meets the requirements for CEng registrationc.whittet@gsa.ac.uk
UNIVERSITY OF GLASGOW5 Yrs FTMEng (Hons) Mechanical Design Engineering2005 - 2019Membership and CEng registrationc.whittet@gsa.ac.uk
UNIVERSITY OF GLASGOW5 Yrs FTMEng (Hons) Product Design Engineering2005 - 2019Membership and CEng registrationc.whittet@gsa.ac.uk
UNIVERSITY OF GLASGOW1 Yr FTMSc Product Design Engineering2014 - 2019Membership and further learning towards CEng registrationc.whittet@gsa.ac.uk
UNIVERSITY OF GLASGOW (SINGAPORE)4 Yrs FTBEng (Hons) Mechanical Design Engineering2011 - 2022Membership and partially meets the requirements for CEng registrationFannon.Lim@glasgow.ac.uk
THE HONG KONG POLYTECHNIC UNIVERSITY3 Yrs FT(05003) BEng (Hons) Product Analysis and Engineering Design previously BEng (Hons) Product Analysis with Design2005 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationmmcwl@polyu.edu.hk
THE HONG KONG POLYTECHNIC UNIVERSITY4 Yrs PT(43094) BEng (Hons) Product Analysis and Engineering Design previously BEng (Hons) Product Analysis with Design2005 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationmmcwl@polyu.edu.hk
THE HONG KONG POLYTECHNIC UNIVERSITY4 Yrs PT(43092) BSc (Hons) Product Design with Analysis2000 - 2005Membership and CEng registration with additional learningmmcwl@polyu.edu.hk
IMPERIAL COLLEGE4 Yrs FTMEng Design Engineering2015 - 2020Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE3 Yrs FTBEng Biomedical Engineering2018 - 2023Membership and partially meets the requirements for CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE4 Yrs FTMEng Biomedical Engineering2018 - 2023Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE5 Yrs FTMEng Biomedical Engineering with a Year in Industry2018 - 2023Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE5 Yrs FTMEng Biomedical Engineering with a Year Abroad2018 - 2023Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE1 Yr FTMSc Biomedical Engineering2018 - 2023Membership and CEng registration with additional learningm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE3 Yrs FTBEng Molecular Bioengineering2018 - 2023Membership and partially meets the requirements for CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE4 Yrs FTMEng Molecular Bioengineering2018 - 2023Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE5 Yrs FTMEng Molecular Bioengineering with a year in Industry2018 - 2023Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE5 Yrs FTMEng Molecular Bioengineering with a Year Abroad2018 - 2023Membership and CEng registrationm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE1 Yr FTMsc Human and Biological Robotics2018 - 2023Membership and CEng registration with additional learningm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE1 Yr FTMRes Medical Device Design and Entrepreneurship2018 - 2023Membership and CEng registration with additional learningm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE1 Yr FTMRes Bioengineering2018 - 2023Membership and CEng registration with additional learningm.ghajari@imperial.ac.uk
IMPERIAL COLLEGE1 Yr FTMRes Meurotechnology2018 - 2023Membership and CEng registration with additional learningm.ghajari@imperial.ac.uk
KINGSTON UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Mechanical Engineering2004 - 2008Membership, IEng registration and partially meets the requirements for CEng registrationa.ordys@kingston.ac.uk
KINGSTON UNIVERSITY4 Yrs FT
5 Yrs SW
BEng (Hons) Mechanical Engineering with Foundation Year2004 - 2008Membership, IEng registration and partially meets the requirements for CEng registrationa.ordys@kingston.ac.uk
KINGSTON UNIVERSITY4 Yrs FT
5 Yrs SW
MEng Mechanical Engineering2004 - 2008Membership and CEng registrationa.ordys@kingston.ac.uk
UNIVERSITY OF LEEDS3 Yrs FTBSc Product Design2014 - 2020Membership, RProdDes and IEng registrationd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS4 Yrs FTBSc Product Design (International)2014 - 2020Membership, RProdDes and IEng registrationd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS4 Yrs FTBSc Product Design (Industrial)2014 - 2020Membership, RProdDes and IEng registrationd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS3 Yrs FTBDes Product Design2012 - 2017Membership, RProdDes and IEng registrationd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS4 Yrs FTBDes Product Design (International)2012 - 2017Membership, RProdDes and IEng registrationd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS4 Yrs FTBDes Product Design (Industrial)2012 - 2017Membership, RProdDes and IEng registrationd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS4 Yrs FTMDes Product Design2012 - 2020Membership and CTPDd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS5 Yrs FTMDes Product Design (International)2012 - 2020Membership and CTPDd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LEEDS5 Yrs FTMDes Product Design (Industrial)2012 - 2020Membership and CTPDd.b.trowsdale@leeds.ac.uk
UNIVERSITY OF LIMERICK4 Yrs FTBSc (Hons) Product Design &Technology2010 - 2018Membership and RProdDesMuireann.McMahon@ul.ie
LIVERPOOL JOHN MOORES UNIVERSITY3 Yrs FTBSc (Hons) Product Innovation & Development2011 - 2018Membership and RProdDesA.Papworth@ljmu.ac.uk
LIVERPOOL JOHN MOORES UNIVERSITY3 Yrs FTBSc (Hons) Computer Aided Design2011 - 2018Membership and RProdDesA.Papworth@ljmu.ac.uk
LIVERPOOL JOHN MOORES UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design Engineering2014 - 2022Membership and IEng registrationA.Papworth@ljmu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design2006 - 2013Membership and RProdDesforkesa@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design2013 - 2019Membership, RProdDes and partially meets the requirements for CTPDforkesa@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Engineering Product Design2001 - 2019Membership, RProdDes and partially meets the requirements for CTPDlishmanb@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Engineering Product Design2015 - 2019IEng registrationlishmanb@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design2001 - 2005Membershipforkesa@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Sports Product Design2001 - 2010Membership and RProdDesforkesa@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and The Environment2003 - 2010Membership and RProdDesforkesa@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design Computing2003 - 2010Membership and RProdDesforkesa@lsbu.ac.uk
LONDON SOUTH BANK UNIVERSITY1 Yr FT
2 Yrs PT
MSc Engineering Product Design2001 - 2005Membershipforkesa@lsbu.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design and Technology2011 - 2020Membership and RProdDesj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design and Technology with a Diploma in Professional Studies2011 - 2020Membership and RProdDesj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design and Technology2003 - 2005Membership and IEng registrationj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Technology2006 - 2015Membership and IEng registrationj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BA (Hons) Industrial Design and Technology with a Diploma in Professional Studies2006 - 2015Membership and IEng registrationj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Technology2016 - 2020Membership and RProdDesj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (LOUGHBOUROUGH DESIGN SCHOOL)3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Technology with a Diploma in Professional Studies2016 - 2020Membership and RProdDesj.r.mccardle@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (INSTITUTE OF POLYMER TECHNOLOGY AND MINERALS ENGINEERING)3 Yrs FT
4 Yrs SW
BSc (Hons) Applied Design2003 - 2006Memberships.n.b.hodgson@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (INSTITUTE OF POLYMER TECHNOLOGY AND MINERALS ENGINEERING)3 Yrs FT
4 Yrs SW
BSc (Hons) 3F Design with Engineering Materials2006 - 2008Membership and RProdDesH.Wu2@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (INSTITUTE OF POLYMER TECHNOLOGY AND MINERALS ENGINEERING)3 Yrs FT
4 Yrs SW
BSc (Hons) Design with Engineering Materials2009 - 2013Membership and RProdDesH.Wu2@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)3 Yrs FT
4 Yrs SW
BEng (Hons) Product Design Engineering2010 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)3 Yrs FT
4 Yrs SW
BSc (Hons) Sports Technology2015 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)4 Yrs FT
5 Yrs SW
MEng (Hons) Product Design Engineering2010 - 2020Membership and CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)1 Yr FT
up to 8 Yrs PT
MSc Advanced Manufacturing Engineering & Management2016 - 2020Membership and meets the further learning requirements for CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)1 Yr FT
up to 8 Yrs PT
MSc Sustainability Engineering2010 - 2020Membership and meets the further learning requirements for CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)1 Yr FT
up to 8 Yrs PT
MSc Engineering Design2010 - 2020Membership and meets the further learning requirements for CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)1 Yr FT
up to 8 Yrs PT
MSc Engineering Design and Manufacture2010 - 2015Membership and meets the further learning requirements for CEng registrationmmadmissions@lboro.ac.uk
LOUGHBOROUGH UNIVERSITY (WOLFSON SCHOOL OF MECHANICAL AND MANUFACTURING ENGINEERING)1 Yr FT
up to 8 Yrs PT
MSc Mechanical Engineering2010 - 2020Membership and meets the further learning requirements for CEng registrationmmadmissions@lboro.ac.uk
MANCHESTER METROPOLITAN UNIVERSTIY3 Yrs FTBSc (Hons) Design Engineering2015 - 2021Membership and IEng registrations.sashikumar@mmu.ac.uk
MANCHESTER METROPOLITAN UNIVERSTIY4 Yrs SWBSc (Hons) Design Engineering2015 - 2021Membership and IEng registrations.sashikumar@mmu.ac.uk
MANCHESTER METROPOLITAN UNIVERSTIY3 Yrs FTBSc (Hons) Product Design and Technology2015 - 2021Membership and IEng registrations.sashikumar@mmu.ac.uk
MANCHESTER METROPOLITAN UNIVERSTIY4 Yrs SWBSc (Hons) Product Design and Technology2015 - 2021Membership and IEng registrations.sashikumar@mmu.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
5/8 Yrs PT
BA (Hons) Product Design2012 - 2021Membership and RProdDesm.karananoglu@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Electronic Engineering2017 - 2021Membership and partially meets the requirements for CEng registrationm.karananoglu@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Design Engineering2017 - 2021Membership and partially meets the requirements for CEng registrationm.karananoglu@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Robotics2017 - 2021Membership and partially meets the requirements for CEng registrationm.karananoglu@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
4 Yrs SW
BEng (Hons) Mechatronics2017 - 2021Membership and partially meets the requirements for CEng registrationm.karananoglu@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FTBA (Hons) Design and Technology2001 - 2005Membershipa.bardill@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
4 Yrs SW
6 Yrs PT
BSc (Hons) Engineering Product Design2004 - 2007Membership and IEng registrationw.griffiths@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
4 Yrs SW
6 Yrs PT
BSc (Hons) Product Design and Robotics (previously BSc (Hons) Engineering Product Design)2008 - 2012Membership and IEng registrationw.griffiths@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FT
5/8 Yrs PT
BSc (Hons) Product Design2012 - 2017Membership and RProdDesm.karananoglu@mdx.ac.uk
MIDDLESEX UNIVERSITY3 Yrs FTMDes Product Design Innovation and Management2004 - 2006MembershipP.Fossick@mdx.ac.uk
MIDDLESEX UNIVERSITY1 YrMSc Design Engineering2007 - 2011Membership and further learning towards CEng registrations.prior@mdx.ac.uk
MIDDLESEX UNIVERSITY1 YrMSc in Interaction Design2007 - 2011Membershipb.fields@mdx.ac.uk
NEW COLLEGE LANARKSHIRE2 Yrs FTHNC/HND CADD2002 - 2006Membershipbarry.skea@nclan.ac.uk
NEW COLLEGE LANARKSHIRE2 Yrs FTHND Computer Aided Draughting and Design2013 - 2017Membershipbarry.skea@nclan.ac.uk
NEWBURY COLLEGE2 Yrs PTHNC Electronic Engineering2009 - 2019Membership and EngTech registrationinfo@newbury-college.ac.uk
NEWBURY COLLEGE2 Yrs PTHNC Mechanical Engineering2009 - 2019Membership and EngTech registrationinfo@newbury-college.ac.uk
NEWBURY COLLEGE2 Yrs PTHND Mechanical Engineering2009 - 2019Membership and partially meets the requirements for IEng registration subject to further appropriate learning to degree levelinfo@newbury-college.ac.uk
UNIVERSITY OF NOTTINGHAM3 Yrs FTBEng (Hons) Product Design and Manufacture2008 - 2022Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs SWBEng (Hons) Product Design and Manufacture including an Industrial Year2016 - 2022Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM3 Yrs FTBEng (Hons) Product Design and Manufacture including an Integrated Study Abroad Year2017 - 2022Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM3 Yrs FTBEng (Hons) Mechanical Engineering2003 - 2022Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs SWBEng (Hons) Mechanical Engineering including an Industrial Year2018 - 2022Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM3 Yrs FTBEng (Hons) Mechanical Engineering including an Integrated Study Abroad Year2018 - 2022Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM3 Yrs FTBEng (Hons) Design Engineering2008 - 2017Membership, IEng registration and partially meets the requirements for CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs FTMEng (Hons) Product Design and Manufacture2008 - 2022Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM5 Yrs SWMEng (Hons) Product Design and Manufacture including an Industrial Year2016 - 2022Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs FTMEng (Hons) Product Design and Manufacture including an Integrated Study Abroad Year2017 - 2022Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs FTMEng (Hons) Design Engineering2008 - 2017Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs FTMEng (Hons) Mechanical Engineering2003 - 2022Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM5 Yrs SWMEng (Hons) Mechanical Engineering including an Industrial Year2015 - 2022Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM4 Yrs FTMEng (Hons) Mechanical Engineering including an Integrated Study Aboard Year2018 - 2022Membership and CEng registrationstephen.pickering@nottingham.ac.uk
UNIVERSITY OF NOTTINGHAM (MALAYSIA CAMPUS)3 Yrs FTBEng (Hons) Mechanical Engineering2004 - 2023Membership, IEng registration and partially meets the requirements for CEng registrationenquiries@nottingham.edu.my
UNIVERSITY OF NOTTINGHAM (MALAYSIA CAMPUS)4 Yrs FTMEng (Hons) Mechanical Engineering2004 - 2023Membership and CEng registrationenquiries@nottingham.edu.my
UNIVERSITY OF NOTTINGHAM (MALAYSIA CAMPUS)1 Yr FTMSc Mechanical Engineering2019 - 2023Membership and CEng registration with further learningenquiries@nottingham.edu.my
UNIVERSITY OF NOTTINGHAM (NINGBO CHINA)3 Yrs FTBEng (Hons) Mechanical Engineering2014 - 2018Membership and partially meets the requirements for CEng registrationadmissions@nottingham.edu.cn
UNIVERSITY OF NOTTINGHAM (NINGBO CHINA)3 Yrs FTBEng (Hons) Product Design & Manufacture2014 - 2018Membership and partially meets the requirements for CEng registrationadmissions@nottingham.edu.cn
THE NOTTINGHAM TRENT UNIVERSITY3 Yrs FTBSc (Hons) Product Design2005 - 2020Membership and RProdDesphillipa.marsh@ntu.ac.uk
THE NOTTINGHAM TRENT UNIVERSITY3 Yrs FTBSc (Hons) Computer Aided Product Design2005 - 2009Membership and RProdDesphillipa.marsh@ntu.ac.uk
THE NOTTINGHAM TRENT UNIVERSITY1 Yr FT
2 Yrs PT
MSc Advanced Product Design Engineering2010 - 2015Membership and further learning towards CEng registrationphillipa.marsh@ntu.ac.uk
THE NOTTINGHAM TRENT UNIVERSITY1 Yr FT
2 Yrs PT
MSc Smart Design2010 - 2015Membership and further learning towards CEng registrationphillipa.marsh@ntu.ac.uk
THE NOTTINGHAM TRENT UNIVERSITY4 Yrs FTMSc Advanced Product Design Engineering2016 - 2020Membership and further learning towards CTPDphillipa.marsh@ntu.ac.uk
THE NOTTINGHAM TRENT UNIVERSITY4 Yrs FTMSc Smart Design2016 - 2020Membership and further learning towards CTPDphillipa.marsh@ntu.ac.uk
OPEN UNIVERSITY3 Yrs PT
FT equivalent
BEng (Hons) Engineering2008 - 2015Membership and partially meets the academic requirements for CEng registration and fully meets the academic requirements for IEng registration from Graduation 31 January 2011 to 31 December 2015engineering@open.ac.uk
OPEN UNIVERSITY3 Yrs PT
FT equivalent
BEng (Hons) EngineeringUpto - 2019Membership and partially meets the requirements for CEng registrationengineering@open.ac.uk
OPEN UNIVERSITYPTBSc (Hons) Design & Innovation (Design & Engineering route)2016 - 2020Membership and RProdDesengineering@open.ac.uk
OPEN UNIVERSITYPTBSc (Hons) Design & Innovation (Environmental route)2016 - 2020Membership and RProdDesengineering@open.ac.uk
OPEN UNIVERSITY4 Yrs PT
FT equivalent
MEng (Hons) Engineering2007 - 2015Membership and CEng registration from Graduation 31 January 2011 to 31 December 2015.engineering@open.ac.uk
OPEN UNIVERSITY4 Yrs PT
FT equivalent
MEng (Hons) EngineeringUpto - 2019Membership and CEng registrationengineering@open.ac.uk
OPEN UNIVERSITY4 Yrs PT
FT equivalent
MSc Engineering2011 - 2015Membership and partially meets the academic requirements for CEng registration from Graduation 31 January 2011 to 31 December 2015engineering@open.ac.uk
OPEN UNIVERSITY4 Yrs PT
FT equivalent
MSc EngineeringUpto - 2019Membership and further learning towards CEng registrationengineering@open.ac.uk
OPEN UNIVERSITY6 Yrs PTBEng (Hons) Engineering (top up)Upto - 2019Membership and IEng registrationengineering@open.ac.uk
UNIVERSITY OF PLYMOUTH3 Yrs FT
4 Yrs PT
BSc (Hons) Mechanical Design and Manufacture (MDM)2008 - 2017Membership and IEng registrationalistair.cree@plymouth.ac.uk
UNIVERSITY OF PLYMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Marine & Composites Technology (MCT)2008 - 2017Membership and IEng registrationalistair.cree@plymouth.ac.uk
UNIVERSITY OF PLYMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Marine Sports Technology (MST)2008 - 2012Membership and IEng registrationalistair.cree@plymouth.ac.uk
UNIVERSITY OF PLYMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Mechanical Engineering and Computer Aided Design (MECAD)2008 - 2012Membership and IEng registrationalistair.cree@plymouth.ac.uk
UNIVERSITY OF PORTSMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Innovation2009 - 2018Membership and RProdDespetko.petkov@port.ac.uk
UNIVERSITY OF PORTSMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Industrial Design (previously called BSc (Hons) Computer Aided Product Design2017 - 2018Membership and RProdDespetko.petkov@port.ac.uk
UNIVERSITY OF PORTSMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Computer Aided Product Design2009 - 2016Membership and RProdDespetko.petkov@port.ac.ukk
UNIVERSITY OF PORTSMOUTH3 Yrs FT
4 Yrs SW
BSc (Hons) Product Design and Modern Materials2009 - 2013Membership and RProdDespetko.petkov@port.ac.uk
SMALLPEICE TRUST4 DaysEngineering Experience2004 - 2006Endorsementinfo@smallpeicetrust.rog.uk
SMALLPEICE TRUST4 DaysEngineering Skills and Careers2004 - 2006Endorsementinfo@smallpeicetrust.rog.uk
SMALLPEICE TRUST4 DaysEngineering Management2004 - 2006Endorsementinfo@smallpeicetrust.rog.uk
SMALLPEICE TRUST7 MonthsEngineering Careers Foundation Year2000 - 2005Endorsementinfo@smallpeicetrust.rog.uk
SOUTHAMPTON SOLENT UNIVERSITY3 Yrs FTBA (Hons) Product Design2011 - 2022Membership and RProdDesmark.jones@solent.ac.uk
UNIVERSITY OF STRATHCLYDE4 Yrs FTBEng (Hons) Engineering and Enterprise Management2005 - 2010Membership, IEng registration and partially meets the requirements for CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE4 Yrs FTBEng (Hons) Manufacturing Engineering and Technology2005 - 2010Membership, IEng registration and partially meets the requirements for CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE4 Yrs FTBEng (Hons) Product Design Engineering2005 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE4 Yrs FTBEng Production Engineering and Management2009 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE4 Yrs FTBEng Sports Engineering2005 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE4 Yrs FTBSc (Hons) Product Design and Innovation2007 - 2020Membership, IEng registration and partially meets the requirements for CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng (Hons) Engineering and Enterprise Management2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Engineering and Enterprise Management with a Diploma in Entrepreneurship2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Manufacturing Engineering and Technology2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Manufacturing Engineering Technology with a Diploma in Entrepreneurship2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Manufacturing Engineering and Technology with a Diploma in Management2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Product Design Engineering2005 - 2020Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Product Design Engineering with a Diploma in Entrepreneurship2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Product Design Engineering with a Diploma in Management2005 - 2010Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Production Engineering and Management2009 - 2020Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE5 Yrs FTMEng Sports Engineering2011 - 2020Membership and CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE1 Yr FT
2 Yrs PT
MSc Advanced Manufacturing: Technology and Systems2015 - 2020Membership and further learning towards CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE1 Yr FT
2 Yrs PT
MSc Design Engineering2015 - 2020Membership and further learning towards CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE1 Yr FT
2 Yrs PT
MSc Design Engineering with Advanced Product Development2015 - 2020Membership and further learning towards CEng registration
UNIVERSITY OF STRATHCLYDE1 Yr FT
2 Yrs PT
MSc Design Engineering with Sustainability2015 - 2020Membership and further learning towards CEng registration
UNIVERSITY OF STRATHCLYDE1 Yr FT
2 Yrs PT
MSc Mechatronics and Automation2015 - 2020Membership and further learning towards CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF STRATHCLYDE1 Yr FT
2 Yrs PT
MSc Product Design2015 - 2020Membership and further learning towards CEng registrationw.j.ion@strath.ac.uk
UNIVERSITY OF SUSSEX3 Yrs FTBSc (Hons) Product Design2008 - 2023Membership and RProdDesClare.Harris@sussex.ac.uk
UNIVERSITY OF SUSSEX4 Yrs SWBSc (Hons) in Product Design with an Industrial Year2008 - 2023Membership and RProdDesClare.Harris@sussex.ac.uk
UNIVERSITY OF SUSSEX4 Yrs FTMEng Engineering Design2006 - 2009Membership and CEng registrationClare.Harris@sussex.ac.uk
UNIVERSITY OF SWANSEA3 Yrs FTBEng (Hons) Aerospace Engineering2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Aerospace Engineering with a Foundation Year2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Aerospace Engineering with a Year Abroad2017 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs SWBEng (Hons) Aerospace Engineering with a Year in Industry2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA3 Yrs FTBEng (Hons) Aerospace Engineering with Propulsion2007 - 2011Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Aerospace Engineering with Propulsion with a Year in Industry2007 - 2011Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA3 Yrs FTBEng (Hons) Mechanical Engineering2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Mechanical Engineering with a Year in Europe2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Mechanical Engineering with a Year in Industry2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Mechanical Engineering with a Year in North America2007 - 2021Membership and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Mechanical Engineering with an Integrated Foundation Year2007 - 2021Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA3 Yrs FTBEng (Hons) Product Design Engineering2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Engineering with a Year in Europe2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Engineering with a Year in Industry2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Engineering with a Year in North America2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Engineering with an Integrated Foundation Year2007 - 2016Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA3 Yrs FTBEng (Hons) Product Design Technology2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Technology with a Year in Europe2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Technology with a Year in Industry2007 - 2012Membership and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Product Design Technology with a Year in North America2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTBEng (Hons) Integrated 4 Year Product Design Technology2007 - 2012Membership, IEng registration and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTMEng Aerospace Engineering2007 - 2021Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA5 Yrs SWMEng Aerospace Engineering with a Year in Industry2007 - 2016Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA5 Yrs SWMEng Aerospace Engineering with a Year Abroad2017 - 2021Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTMEng Aerospace Engineering with Propulsion2007 - 2011Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA5 Yrs SWMEng Aerospace Engineering with Propulsion with a Year in Industry2007 - 2011Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTMEng Mechanical Engineering2007 - 2021Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA5 Yrs SWMEng Mechanical Engineering with a Year in Industry2012 - 2021Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA4 Yrs FTMEng Product Design Engineering2007 - 2016Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA5 Yrs SWMEng Product Design Engineering with a Year in Industry2012 - 2016Membership and CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF SWANSEA1 Yrs FT
2 Yrs PT
3 Yrs PT
MSc Aerospace Engineering2010 - 2021Membership and partially meets the requirements for CEng registrationi.masters@swansea.ac.uk
UNIVERSITY OF WEST ENGLANDFT/ PT/ SWBSc (Hons) Product Design Technology2011 - 2016Membership and RProdDesandrew.batchelor@uwe.ac.uk
UNIVERSITY OF WEST ENGLANDFT/ PT/ SWBSc (Hons) Product Design and Innovation2005 - 2007Membership and RProdDesandrew.batchelor@uwe.ac.uk
UNIVERSITY OF WEST ENGLANDFT/SWBSc (Hons) Product Design and Technology2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDandrew.batchelor@uwe.ac.uk
UNIVERSITY OF WEST ENGLANDFT/SWBSc (Hons) Product Design and Technology with year in industry2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDandrew.batchelor@uwe.ac.uk
UNIVERSITY OF WEST ENGLANDFT/SWBSc (Hons) Product (name changed from Creative Product Design)2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDandrew.batchelor@uwe.ac.uk
UNIVERSITY OF WEST ENGLANDFT/SWBSc (Hons) Product Design with year in industry2017 - 2021Membership, RProdDes and partially meets the requirements for CTPDandrew.batchelor@uwe.ac.uk
UNIVERSITY OF WEST ENGLANDFT/SWBSc (Hons) Creative Product Design2013 - 2019Membership, RProdDes and partially meets the requirements for CTPDandrew.batchelor@uwe.ac.uk