head

Accredited Courses

The Institution supports educational bodies (Universities etc) running courses for the training of professional engineers by accrediting the courses that these bodies offer.

The course accreditation procedure involves a thorough assessment of the course documents, assessment procedures and teaching facilities by a panel of acknowledge experts. The panel will also conduct separate meets with both lecturers and current students during the course of the assessment.

Accredited courses are fully supported by the Institution, and IED Student membership is free to full-time students for the duration of their studies and their first year of Graduate membership. Successful students can up-grade to Graduate membership and, once they have obtained the necessary professional experience, they can progress to full membership of the Institution.

The following courses have satisfied the IED accreditation criteria and further information can be obtained through the contacts below.

Anglia Ruskin University
Aston University
Brunel University
Buckinghamshire New University
City of Bristol College
Coventry University
De Montfort University
Dublin Institute of Technology
Kingston University
London South Bank University
Loughborough University
Loughborough University
Middlesex University
Motherwell College
Napier University
Open University
Smallpeice Trust
The Hong Kong Polytechnic University

The Nottingham Trent University
The University of Bristol
The University of Nottingham
University of Bournemouth
University of Brighton
University of Bristol
University of Central Lancashire
University of Derby
University of East London
University of Glamorgan
University of Glasgow
University of Plymouth
University of Portsmouth
University of Strathclyde
University of Sussex
University of Swansea
University of Wales Institute, Cardiff
University of West of England

Anglia Ruskin University

School of Design and Communication Systems
Central Campus
Bishop Hall Lane
Chelmsford
Essex
CM1 1SQ
Tel: 01245 493131 ext 3067
Website: http://www.anglia.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Years F/T or 4 Years P/T	BSc(Hons) Computer Aided Product Design	2002 - 2006	Membership in the Product Design and Technology Division	J.S.Bowman@anglia.ac.uk
F/T 2 Years	HND Computer Aided Product Design	2002 - 2006	Membership in the Product Design and Technology Division	J.S.Bowman@anglia.ac.uk

Aston University

School of Engineering and Applied Science
Aston University
Aston Triangle
Birmingham
B4 7ET
Tel: 0121 204 3400
Website: www.seas.aston.ac.uk

Type	Award	Accreditation	For	Course Contact
3 YrF/t 4 YrS/W	BEng(Hons) Design Engineering	2006 - 2013	Membership and partially meets the academic requirements for CEng registration	c.d.evans@aston.ac.uk
3 Yr F/t 4 Yrs S/W	BSc(Hons) Engineering Product Design	2006 - 2013	Membership	c.d.evans@aston.ac.uk
3 Yr F/T 4 Yrs S/W	BSc(Hons) Industrial Product Design	2006 - 2013	Membership	c.d.evans@aston.ac.uk
3 Yr F/T 4 Yrs S/W	BSc(Hons) Automotive Product Design	2006 - 2013	Membership	c.d.evans@aston.ac.uk
3 Yr F/T 4 Yrs S/W	BSc(Hons) Design Management	2006 - 2013	Membership	c.d.evans@aston.ac.uk
3 Yr F/t 4 Yrs S/ W	BSc(Hons) Medical Product Design	2006 - 2013	Membership	c.d.evans@aston.ac.uk
3 Yr F/T 4 Yrs S/W	BSc(Hons) Sustainable Product Design	2010 - 2011	Membership	c.d.evans@aston.ac.uk
1 Yr FT	MSc Product Design Enterprise	2010 - 2011	Membership and further learning towards CEng	c.d.evans@aston.ac.uk
1 Yr FT	MSc Product Design Innovation	2009 - 2012	Membership and further learning towards CEng	c.d.evans@aston.ac.uk

Brunel University

School of Engineering and Design
Uxbridge
Middlesex
UB8 3PH
Tel: 01895 265737
Website: http://www.brunel.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Years F/T or 4 Years S/wich	BSc Industrial Design	2001 - 2005	Membership	Stuart-Gabrielson@brunel.ac.uk
3 Years F/T or 4 Years S/wich	BSc Industrial Design Engineering	2001 - 2005	Membership	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/wich	BSc Product Design	2001 - 2005	Membership	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/wich	MEng Mechanical Engineering and Design	2001 - 2005	Membership	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/wich	BA Industrial Design and Technology	2001 - 2005	Membership	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/Wich	BSc(Hons) Industrial Design	2006 - 2011	Membership in the Product Design and Technology division	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/Wich	BSc(Hons) Product Design	2006 - 2011	Membership in the Product Design and Technology division	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/Wich	BA(Hons) Industrial Design and Technology	2006 - 2011	Membership in the Product Design and Technology division	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/Wich	BSc Product Design Engineering	2006 - 2011	Membership in the Product design and technology division	Stuart-Gabrielson@brunel.ac.uk
3 yrs FT or 4 yrs S/Wich	BSc Virtual Product Design	2004 - 2008	Membership in the Product design and technology division	Stuart-Gabrielson@brunel.ac.uk
1 yr FT 3 yr PT	MA Design and branding Strategy	2008 – 2011	Membership	Stuart-Gabrielson@brunel.ac.uk
1 year FT 2-4 years P/T	MSc Integrated Product Design	2009 – 2011	Membership	Stuart-Gabrielson@brunel.ac.uk
1 year FT 2-4 years P/T	MSc Human Centred Design	2009 – 2011	Membership	Stuart-Gabrielson@brunel.ac.uk
1 yr FT 3 yr PT	MA Design Strategy and Innovation	2008 – 2011	Membership	Stuart-Gabrielson@brunel.ac.uk

Buckinghamshire New University

Faculty of Creativity and Culture
Queen Alexandra Road
High Wycombe
HP11 2JZ
Tel: 01494 605050
Website: http://www.bcuc.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yrs F/T	BSc(Hons) Computer Aided Design	2002 - 2007	Membership and IEng registration with EC	lyndon.buck@bcuc.ac.uk
3 Yrs F/T	BSc(Hons) Product Design	2002 - 2007	Membership and IEng registration with EC	Tim.coole@bcuc.ac.uk
3 Yrs P/T	BEng (Hons) Mechanical Engineering Design	2009 – 2013	Membership and IEng registration with EC	Tim.coole@bcuc.ac.uk
3 Yrs F/T	BSc(Hons) Computer Aided Design with Computing	2002 - 2007	Membership and IEng registration with EC	lyndon.buck@bcuc.ac.uk
3 Yrs F/T	BSc(Hons) Computer Aided Design with Multimedia	2002 - 2007	Membership and IEng registration with EC	lyndon.buck@bcuc.ac.uk
3 Yrs F/T	BSc(Hons) Product Design with Multimedia	2002 - 2007	Membership and IEng registration with EC	lyndon.buck@bcuc.ac.uk
2 Years P/T	HNC Mechanical Engineering Design	2010 - 2013	Membership and registration at EngTech level with EC
3 Yr FT	BA(Hons) Product Design	2009 – 2013	Membership	advice@bucks.ac.uk
3 Yr PT	FDSc Engineering (Mechanical Engineering)	2009 – 2013	Membership and EngTech registration and partial meets academic requirements towards IEng	advice@bucks.ac.uk
4 Yr PT	MEng Mechanical Engineering Design	2008 - 2013	Membership and CEng registration	advice@bucks.ac.uk
3 Yr FT	BSc(Hons) Product Design	2009 – 2013	Membership	advice@bucks.ac.uk

City of Bristol College

College Green Centre
St Georges Road
Bristol
BS1 5UA
Tel: 0117 9045300
Website: http://www.cityofbristol.ac.uk

Type	Award	Accreditation	For	Course Contact
60 hours P/T	Computer Aided Draughting 2D2	2002 - 2005	Membership in the Product Design and Technology division	linda.copestake@cityofbristol.ac.uk
60 hours P/T	Basic Cad 2D1	2002-2005	Membership in the Product Design and Technology division	linda.copestake@cityofbristol.ac.uk
2 years F/T or 3 yrs P/T	Foundation Degree CAD (Design Technologies)	2005 - 2007	Membership in the Product Design and Technology division	linda.copestake@cityofbristol.ac.uk

Coventry University

Maurice Foss Building
School of Engineering
Priory Street
Coventry
CV1 5FB
Tel: 024 7683 8363
Website: http://www.coventry.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Years F/T	MDes/BSc(Hons) Industrial Product Design	2000 - 2005, 2005 - 2009	Membership in the Product Design and Technology division	s.owen@coventry.ac.uk

De Montfort University

Faculty of Art and Design
Mill Lane
Fletcher Building
The Gateway
Leciester
LE1 9BH
Tel: 0116 255 1551
Fax: 0116 257 7052
Website: http://www.dmu.ac.uk

Type	Award	Accreditation	For	Course Contact
4 years Sandwich or 8 years P/T	BSc(Hons) Industrial Design (Engineering)	1997 - 2001	Membership	pbford@dmu.ac.uk
4 years Sandwich or 8 years P/T	BSc(Hons) Industrial Design	2002 - 2007	Membership and IEng registration	pbford@dmu.ac.uk
3 yr FT or 4 yr S/W	BSc(Hons) Product Design	2008 – 2012	Membership and Incorporated Engineer registration with EC	pbford@dmu.ac.uk

Dublin Institute of Technology

School of Manufacturing and Design Engineering
Bolton Street
Dublin 1
IRELAND
Tel: +33 1-402 3627
Website: http://www.dit.ie

Type	Award	Accreditation	For	Course Contact
4 Yrs FT	BSc(Hons) Product Design	2003 – 2011	Membership	john.lawlor@dit.ie

Kingston University

Faculty of Engineering
Kingston University
Roehampton Vale Centre
Friars Avenue
London
SW15 3DW
Tel: 020 8547 7704
Website: http://www.kingston.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yrs f/t 4yrs s/wich	BEng(Hons) Mechanical Engineering	2004 - 2008	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC to this course	a.ordys@kingston.ac.uk
4 yrs f/t 5yrs s/wich	BEng(Hons) Mechanical Engineering with Foundation Year	2004 - 2008	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	a.ordys@kingston.ac.uk
4 yrs/5 yr s/wich	MEng Mechanical Engineering	2004 - 2008	Membership and CEng registration	a.ordys@kingston.ac.uk

London South Bank University

Department of Architecture and Design
FESBE
103 Borough Road
London
SE1 OAA
Tel:
Website:

Type	Award	Accreditation	For	Course Contact
3 Yr F/T or 4 Yr Sdwich	BSc (Hons) Product Design	2003 - 2005, 2006 - 2010	Membership in the Product design and technology division	Chris.dowlen@sbu.ac.uk
3 Yr F/T or 4 Yr Sdwich	BSc(Hons) Engineering Product Design	2003 - 2005, 2006 - 2010	Membership in the Product design and technology division	Chris.dowlen@sbu.ac.uk
3 Yr F/T or 4 Yr Sdwich	BSc(Hons) Sports Product Design	2003 - 2005, 2006 - 2010	Membership in the Product design and technology division	Chris.dowlen@sbu.ac.uk
3 Yr F/T or 4 Yr Sdwich	BSc Product Design and The Environment	2003 - 2005, 2006 - 2010	Membership in the Product design and technology division	Chris.dowlen@sbu.ac.uk
3 Yr F/T or 4 Yr Sdwich	BSc Product Design Computing	2003 - 2005, 2006 - 2010	Membership in the Product design and technology division	Chris.dowlen@sbu.ac.uk

Loughborough University

Faculty of Social Science and Humanities
Department of Design and Technology
Bridgeman Centre
Loughborough University
Leicestershire
LE11 3TU
Tel: 01509 222652
Website: http://www.lboro.ac.uk/depts/cd

Type	Award	Accreditation	For	Course Contact
3 yrs f/t/ 4yrs s/wich	BSc(Hons) Industrial Design and Technology	2003 - 2005	Membership and IEng registration	p.w.wormald@lboro.ac.uk
	BSc(Hons) Product Design and Technology	2006 - 2010	Membership and IEng registration	p.w.wormald@lboro.ac.uk
3 yrs F/T or 4 yrs s/wich	BA(Hons) Industrial Design and Technology	2006 - 2010	Membership	p.w.wormald@lboro.ac.uk

Loughborough University

Institute of Polymer Technology and
Minerals Engineering
Loughborough
Leicestershire
LE11 3TU
Tel: +44 (0)1509 223331
Website: http://www.lboro.ac.uk/departments/iptme/

Type	Award	Accreditation	For	Course Contact
3 Yrs F/T or 4 Yr Sdwich	BSc(Hons) Applied Design	2003 - 2006	Membership in the Product Design division	s.n.b.hodgson@lboro.ac.uk
3 Yr Ft/ or 4 Yr Swich	BSc(Hons) 3F Design with Engineering Materials	2006 - 2008	Membership	H.Wu2@lboro.ac.uk
3 Yr Ft or 4 Yr Switch	BSc(Hons) Design with Engineering Materials	2009 – 2013	Membership	H.Wu2@lboro.ac.uk

Middlesex University

Product Design and Engineering
School of Engineering and Information Sciences.
Trent Park Campus
Bramley Road
London
N14 4YZ
Tel: 020 8411 5683
Website: http://www.middlesex.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yrs F/T 4 yrs S/W 6 yrs P/T	BSc(Hons) Product Design and Robotics	2008 - 2011	Membership and IEng registration with EC	m.d.bradley@mdx.ac.uk
1 yr	MSc Design Engineering	2007 - 2011	Membership and partially meets the requirements for CEng registration.	s.prior@mdx.ac.uk
3 Yrs FT or 5/8 Yrs PT	BA(Hons) Product Design	2006 - 2011	Membership	w.griffiths@mdx.ac.uk
3 yrs F/T	BA(Hons) Design and Technology	2001 - 2005	Membership	a.bardill@mdx.ac.uk
3 yrs F/T	MDes Product Design Innovation and Management	2004 - 2006	Membership	P.Fossick@mdx.ac.uk
1 yr	MSc in Interaction Design	2007 - 2011	Membership and partially meets the EC requirements for CEng registration.	b.fields@mdx.ac.uk
3 yrs F/T 4 yrs S/W 6 yrs P/T	BSc(Hons) Engineering Product Design	2004 – 2007	Membership and IEng registration with EC	m.d.bradley@mdx.ac.uk

Motherwell College

1 Enterprise Way,
Motherwell,
ML1 2TX
Tel: 01698 232323
Website: http://www.motherwell.co.uk

Type	Award	Accreditation	For	Course Contact
2 Years F/T	HNC/HND CADD	2002 - 2006	Membership	SFleming@Motherwell.co.uk
2 Years F/T	HND Computer Aided Draughting and Design	2006-2012	Membership	SFleming@Motherwell.co.uk

Napier University

10 Colinton Road
Edinburgh
EH10 5DT
Tel: 0131 455 2461
Website: http://www.napier.ac.uk

Type	Award	Accreditation	For	Course Contact
4 Yrs F/T	BSc/BSc(Hons) Product Design Engineering	2002 - 2007	Membership and IEng with EC	imcleod@napier.ac.uk
3 Yrs F/T	BDes(Hons) Consumer Product Design	2005 - 2009	Membership in the Product Design Division	b.rodnes@napier.ac.uk
3 Yrs F/T	BSc Industrial Design	2001 - 2004	Membership	b.rodnes@napier.ac.uk
3 Yrs F/T	BSc Product Design Engineering	2008 – 2013	Membership	imcleod@napier.ac.uk
4 Yrs F/T	BSc(Hons) Product Design Engineering	2008 - 2013	Membership and IEng with EC	imcleod@napier.ac.uk

Open University

Engineering Programme
Faculty of Mathematics,Computing and Technology
Walton Hall
Milton Keynes
UK
MK7 6AA
Tel: 01908 653716
Website: http://www.open.ac.uk

Type	Award	Accreditation	For	Course Contact
P/T learning 3 yrs FT equivalent	BEng(Hons) Engineering	2008 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	engineering@open.ac.uk
P/T learning 4 yrs FT equivalent	MEng Engineering	Graduation 31st July 2007 to 31st December 2010	Membership and CEng with EC	engineering@open.ac.uk

Smallpeice Trust

Holly House
74 Upper Holly Walk
Leamington Spa
Warwickshire
CV32 4JL
Tel: 01926 333200
Website: http://www.smallpeicetrust.org.uk

Type	Award	Accreditation	For	Course Contact
4 days	Engineering Experience	2004 - 2006	Endorsement	clairef@smallpeicetrust.org.uk
4 days	Engineering Skills and Careers	2004 - 2006	Endorsement	clairef@smallpeicetrust.org.uk
4 days	Engineering Management	2004 - 2006	Endorsement	clairef@smallpeicetrust.org.uk
7 months	Engineering Careers Foundation Year	2000 - 2005	Endorsement	clairef@smallpeicetrust.org.uk

The Hong Kong Polytechnic University

Department of Mechanical Engineering
Hung Hom
Kowloon
Hong Kong
Tel: +852 2766 6643
Fax: +852 2365 4703
Website: http://www.polyu.edu.hk

Type	Award	Accreditation	For	Course Contact
3 Years F/T	BEng(Hons) Product Analysis with Design now BEng(Hons) Product Analysis and Engineering Design	2008 - 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	mmcwl@polyu.edu.hk
5 Years P/T	BEng(Hons) Product Analysis with Design	2000 - 2004	Membership and CEng with additional learning	mmcwl@polyu.edu.hk
4 years P/T	BSc(Hons) Product Design and Analysis now BEng(Hons) Product Analysis and Engineering Design	2008 - 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	mmcwl@polyu.edu.hk

The Nottingham Trent University

School of Architecture, Design and the Built Environment,
Burton Street,
Nottingham,
NG1 4BU
Tel: 0115 941 8418
Website: http://www.ntu.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yrs F/T	BA/BSc(Hons) Product Design	2005 - 2009	Membership in the Product Design and Technology division	alan.crisp@ntu.ac.uk
3 Yrs F/T	BSc(Hons) Computer Aided Product Design	2005 - 2009	Membership in the Product Design and Technology division	alan.crisp@ntu.ac.uk
3 Yrs F/T	BSc(Hons) Industrial Design Innovation	2008 - 2009		alan.crisp@ntu.ac.uk

The University of Bristol

Faculty of Engineering
University Walk,
Bristol,
BS8 1TR,
Tel: 0117 928 8108
Website: http://www.bris.ac.uk/engineering/

Type	Award	Accreditation	For	Course Contact
3 yrs FT	BEng Engineering Design	2008-2013	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	engf-office@bristol.ac.uk
4 yrs FT	BEng Engineering Design with Study in Industry	2008-2013	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	engf-office@bristol.ac.uk
4 yrs FT	MEng Engineering Design	2008-2013	Membership and CEng with EC	engf-office@bristol.ac.uk
5 yrs FT	MEng Engineering Design with Study in Industry	2008-2013	Membership and CEng with EC	engf-office@bristol.ac.uk

The University of Nottingham

Faculty of Engineering
School of Mechanical, Materials and Manufacturing Engineering
The University of Nottingham
University Park
Nottingham 
NG7 2RD
Tel: 0115 951 3830
Website: http://www.engineering.nottingham.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yrs FT	BEng(Hons) Product Design and Manufacture	2008-2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	m3-enquiries@nottingham.ac.uk
3 yrs FT	BEng(Hons) Mechanical Engineering	2008-2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	m3-enquiries@nottingham.ac.uk
3 yrs FT	BEng(Hons) Design Engineering	2008-2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	m3-enquiries@nottingham.ac.uk
4 yrs FT	MEng Product Design and Manufacture	2008-2012	Membership and CEng with EC	m3-enquiries@nottingham.ac.uk
4 yrs FT	MEng(Hons) Design Engineering	2008-2012	Membership and CEng with EC	m3-enquiries@nottingham.ac.uk
4 yrs FT	MEng(Hons) Mechanical Engineering	2008-2012	Membership and CEng with EC	m3-enquiries@nottingham.ac.uk

University of Bournemouth

The School of Design,
Engineering and Computing
Bournemouth University
Poole House
Talbot Campus
Poole
Dorset
BH12 5BB
Tel: 01202 503751
Website: http://www.bournemouth.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yrs FT or 4 Years S/Wich	BA/BSc(Hons) Product Design	2010 – 2014	Membership in the Product Design and Technology division	psewell@bournemouth.ac.uk
3 Yrs FT or 4 Yrs S/Wich	BSc(Hons) Computer Aided Product Design now renamed 'BSc(Hons) Design Visualisation'	2005 - 2009	Membership	treynolds@bournemouth.ac.uk
3 yrs FT /4 Yrs S/Wich	BSc(Hons) Design Engineering	2003-2006	Membership	mkoohgil@bournemouth.ac.uk
3 Yrs F/t 4 YR SW	BSc(Hons) Advanced Technology Business Innovation	2010 - 2014	Membership and IEng registration	psewell@bournemouth.ac.uk
3 Yrs F/t 4 YR SW	BSc(Hons) Design Engineering	2007-2014	Membership and IEng registration	psewell@bournemouth.ac.uk
3 Yrs F/t 4 YR SW	BA(Hons) Industrial Design	2010 - 2014	Membership	psewell@bournemouth.ac.uk
I Yr FT	MSc Design Engineering	2010 - 2014	Membership and meets the further learning requirements for CEng	psewell@bournemouth.ac.uk
1 Yr FT	MSc Engineering Design Innovation	2010 - 2014	Membership and meets the further learning requirements for CEng	psewell@bournemouth.ac.uk

University of Brighton

Faculty of Science and Engineering
School of Engineering
Cockcroft Building
Lewes Road
Moulsecoomb
Brighton
East Sussex
BN2 4GJ
Tel: 01273 642300
Website: http://www.brighton.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yrs F/T	BSc(Hons) Product Design	2010 - 2014	Membership In Product Design and Technology division	R.D.Morris@bton.ac.uk
3 yrs F/T	BSc(Hons) Design Technology	2002 - 2006	Membership in Product Design and Technology division	R.D.Morris@bton.ac.uk
3 yrs F/T	BSc(Hons) Sports Technology	2002 - 2006	Membership in Product Design and Technology division	R.D.Morris@bton.ac.uk
3 yrs F/T	BSc(Hons) Product Design with Professional Practice	2007 - 2012	Membership	R.D.Morris@bton.ac.uk
3 yrs F/T	BSc(Hons) Product Design Technology with Professional Practice	2008 - 2012	Membership	R.D.Morris@bton.ac.uk
3 yrs F/T	BSc(Hons) Sports Product Design with Professional Practice	2008 - 2012	Membership	R.D.Morris@bton.ac.uk

University of Bristol

Department of Engineering
Queen’s Building
University Walk
Bristol
BS8 1TR
Tel: 0117 928 7757
Fax: 0117 925 1154
Website: http://www.enm.bris.ac.uk

Type	Award	Accreditation	For	Course Contact
5 Yrs S/wich	MEng in Engineering Design	2001 - 2005	Membership and CEng with EC	Jon.SimsWilliams@bristol.ac.uk

University of Central Lancashire

Department of Technology
Preston
PR1 2HE
Tel: 01772 893311
Website: http://www.uclan.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yrs F/T	BEng(Hons) Computer Aided Engineering	2006 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	JACalderbank@uclan.ac.uk
4 yrs S/Wich	Beng(Hons) Computer Aided Engineering with Industrial Placement	2006 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	JACalderbank@uclan.ac.uk
4 yrs S/Wich	BEng(Hons) Motor Sports Engineering with Industrial Placement	2006 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	JACalderbank@uclan.ac.uk
3 yrs F/t	BEng(Hons) Motor Sports Engineering	2006 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	JACalderbank@uclan.ac.uk
4 yrs F/T	MEng(Hons) Computer Aided Engineering	2006 - 2010	Membership and CEng registration	JACalderbank@uclan.ac.uk
5 yrs S/Wich	MEng(Hons) Computer Aided Engineering with Industrial Placement	2006 - 2010	Membership and CEng registration	JACalderbank@uclan.ac.uk
5 yrs S/Wich	MEng(Hons) Motor Sports Engineering with Industrial Placement	2006 - 2010	Membership and CEng registration	JACalderbank@uclan.ac.uk
4 yrs F/t	MEng(Hons) Motor Sports Engineering	2006 - 2010	Membership and CEng registration	JACalderbank@uclan.ac.uk

University of Derby

Faculty of Arts, Design and Technology
University of Derby
Markeaton Street
Derby
DE22 3AW
Tel: 01332 593138
Fax: 01332 597760
Website: http://www.derby.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yrs F/T 4 Yrs Swich P/T available	BSc(Hons) Product Design, Innovation & Marketing	2006 - 2010	Membership	m.veveris@derby.ac.uk
3 yrs F/T 4 Yrs Swich P/T available	BSc(Hons) Design Technology	2006 - 2010	Membership	m.veveris@derby.ac.uk
3 yrs F/T 4 yrs Swich P/T available	BA(Hons) Product Design	2006 - 2010	Membership	m.veveris@derby.ac.uk

University of East London

School of Computing and Technology
Docklands Campus
4-6 University Way
London
E16 2RD
Tel: 020 8590 7722
Website: http://www.uel.ac.uk

Type	Award	Accreditation	For	Course Contact
3 yr F/T or 4 yr swich	BSc(Hons) Product Design	2003 - 2005	Membership in the Product Design and Technology division	a.j.slawson@uel.ac.uk

University of Glamorgan

Division of Design
Pontypridd
South Wales
Tel: 01443 482875
Website: http://www.glam.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yr F/T or 4 Yrs Swich	BSc(Hons)/BA(Hons) Product Design	2002 - 2006	Membership	jhills@glam.ac.uk

University of Glasgow

University of Glasgow
Dept of Mechanical Engineering
Glasgow
G12 8QQ

Tel:
Website: www.gla.ac.uk

Type	Award	Accreditation	For	Course Contact
4 Yrs FT	BEng Mechanical Design Engineering/ BEng Product Design Engineering	2006 - 2013	Membership and partially meets the requirements for CEng	c.whittet@gsa.ac.uk
5 Yr FT	MEng Mechanical Design Engineering MEng Product Design Engineering	2005 - 2013	Membership and meets the academic requirements for CEng registration	c.whittet@gsa.ac.uk

University of Plymouth

Faculty of Technology 
School of Engineering 
University of Plymouth 
Drake Circus 
Plymouth
PL4 8AA
Tel: +44(0) 1752 586000
Fax: +44(0) 1752 586003
Website: http://www.plymouth.ac.uk/

Type	Award	Accreditation	For	Course Contact
3 Years F/T or 4 Years P/T	BSc (Hons) Mechanical Design and Manufacture (MDM)	2008 - 2012	Membership and IEng registration with EC	technology@plymouth.ac.uk
3yr (4yr SW)	BSc (Hons) Marine & Composites Technology (MCT)	2008 - 2012	Membership and IEng registration with EC	technology@plymouth.ac.uk
3yr (4yr SW)	BSc (Hons) Marine Sports Technology (MST)	2008 - 2012	Membership and IEng registration with EC	technology@plymouth.ac.uk
3yr (4yr SW)	BSc(Hons) Mechanical Engineering and Computer Aided Design (MECAD)	2008 - 2012	Membership and IEng registration with EC	technology@plymouth.ac.uk

University of Portsmouth

Department of Mechanical and
Design Engineering
Anglesea Building
Anglesea Road
Portsmouth
PO1 3DJ
Tel: +44 (0)23 9284 8484
Website: http://www.port.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yrs Ft/4 Yrs Swich	BSc (Hons) Product Design and Innovation	2009 - 2013	Membership	Andrew.Little@port.ac.uk
3 Yrs Ft/4 Yrs Swich	BSc(Hons) Computer Aided Product Design	2009 - 2013	Membership	Andrew.Little@port.ac.uk
3 Yrs Ft/4 Yrs Swich	Product Design and Modern Materials	2009 - 2013	Membership	Andrew.Little@port.ac.uk

University of Strathclyde

James Weir Building
75 Montrose Street
Glasgow
G1 1XJ
Tel:
Website: http://www.strath.ac.uk

Type	Award	Accreditation	For	Course Contact
4 Yrs F/Time	BEng(Hons) Engineering and Enterprise Management	2005 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	w.j.ion@strath.ac.uk
5 Yrs F/Time	MEng (Hons) Engineering and Enterprise Management	2005 - 2010	Membership and CEng registration EC	w.j.ion@strath.ac.uk
5 Yrs F/Time	MEngDip Engineering and Enterprise Mangement with Diploma in Entrepreneurship	2005 - 2010	Membership and CEng registration EC	w.j.ion@strath.ac.uk
4 Yrs F/Time	BEng(Hons) Manufacturing Engineering and Technology	2005 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	w.j.ion@strath.ac.uk
5 Yrs F/Time	MEng Manufacturing Engineering and Technology	2005 - 2010	Membership and CEng registration with EC	w.j.ion@strath.ac.uk
5 Yrs F/Time	MEngDipl Manufacturing Engineering Technology with Diploma in Entrepreneurship	2005 - 2010	Membership and CEng registration with EC	w.j.ion@strath.ac.uk
5 Yrs F/Time	MEngDipl Manufacturing Engineering and Technology with Diploma in Management	2005 - 2010	Membership and CEng registration with EC	w.j.ion@strath.ac.uk
4 Yrs F/Time	BEng(Hons) Product Design Engineering	2005 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	w.j.ion@strath.ac.uk
2663	MEng Product Design Engineering	2005 - 2010	Membership and CEng registration with EC	w.j.ion@strath.ac.uk
6080	MEngDipl Product Design Engineerint with Diploma in Entrepreneurship	2005 - 2010	Membership and CEng registration with EC	w.j.ion@strath.ac.uk
6081	MEngDipl Product Design Engineering with Diploma in Mangaement	2005 - 2010	Membership and CEng registration with EC	w.j.ion@strath.ac.uk
6502	BEng Sports Engineering	2005 - 2010	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC	w.j.ion@strath.ac.uk

University of Sussex

School of Science and Technology
Department of Engineering and Design
TFMRC
Falmer
Brighton
Tel: 01273 877397
Website: http://www.sussex.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yr F/T or 4 Yr Swich	BSc(Hons) Product Design	2008 - 2012	Membership of the IED in the Product Design and Technology division.	j.d.Richardson@sussex.ac.uk
3 Yr F/T or 4 Yr Swich	BSc(Hons) in Product Design including sandwich year	2008 - 2012	Membership in the Product and Technology Division	j.d.Richardson@sussex.ac.uk
4 yrs FT	MEng Engineering Design	2006 - 2009	Membership and CEng registration with the EC	j.d.Richardson@sussex.ac.uk

University of Swansea

Singleton Park 
Swansea
 SA2 8PP
 Wales, UK
Tel: +44 (0)1792 295514
Website: http://www.swan.ac.uk/engineering/

Type	Award	Accreditation	For	Course Contact
4 yrs FT	BEng (Hons) Aerospace Engineering	2007 – 2011	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	MEng (Hons) Aerospace Engineering	2007 – 2012	Membership and CEng registration
4 yrs FT	BEng (Hons) Aerospace Engineering with a Year in Industry	2007 – 2011	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	MEng (Hons) Aerospace Engineering with a Year in Industry	2007 – 2012	Membership and CEng registration
4 yrs FT	BEng (Hons) Aerospace Engineering with Propulsion	2007 – 2011	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	MEng (Hons) Aerospace Engineering with Propulsion	2007 – 2011	Membership and CEng registration
4 yrs FT	MEng (Hons) Aerospace Engineering with Propulsion with a Year in Industry	2007 – 2011	Membership and CEng registration
4 yrs FT	Integrated 4-year BEng (Hons) Aerospace Engineering	2007 – 2011	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons)in Mechanical Engineering	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons)in Mechanical Engineering with a Year in North America	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons)in Mechanical Engineering with a Year in Europe	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons)in Mechanical Engineering with a Year in Industry	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) in Product Design Engineering with a Year in North America	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) in Product Design Engineering with a Year in Europe	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) in Product Design Engineering with a Year in Industry	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) in Product Design Engineering	2007 – 2011	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	MEng (Hons) in Mechanical Engineering	2007 – 2012	Membership and CEng registration
4 yrs FT	MEng (Hons) in Product Design Engineering	2007 – 2012	Membership and CEng registration
4 yrs FT	Integrated BEng (Hons)in Mechanical Engineering	2007 – 2012	Membership and partially meets the requirements for CEng
4 yrs FT	BEng (Hons) Product Design Technology	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) Integrated 4 Year Product Design Technology	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) Product Design Technology with a Year in Industry	2007 – 2012	Membership and partially meets the requirements for CEng
4 yrs FT	BEng (Hons) Product Design Technology with a Year in North America	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC
4 yrs FT	BEng (Hons) Product Design Technology with a Year in Europe	2007 – 2012	Membership and partially meeting the requirements for CEng and fully meets the requirements for IEng registration with the EC

University of Wales Institute, Cardiff

School of Product and Engineering Design
Western Avenue
Cardiff
CF5 2YB
Tel: 02920 416070
Website: http://www.uwic.ac.uk

Type	Award	Accreditation	For	Course Contact
3 Yr F/T	BA(Hons) Product Design	2002 - 2004, 2005 - 2009	Membership	pwilgeroth@uwic.ac.uk
3 Yr F/T	BA(Hons) Multimedia Product Design	2002 - 2004, 2005 - 2009	Membership	pwilgeroth@uwic.ac.uk
3 Yr F/T	BSc(Hons) Product Design and Technology (Mechanics and Electroics)	2002 - 2004	Membership	pwilgeroth@uwic.ac.uk
3 Yr F/T	BSc(Hons) Computer Aided Product Design	2002 - 2004, 2005 - 2009	Membership	pwilgeroth@uwic.ac.uk
3 Yr F/T	BSc(Hons) Product Design	2005 - 2009	Membership	pwilgeroth@uwic.ac.uk

University of West of England

Faculty of Environment and Technology
Bristol Institute of Technology
Design and Engineering Department
University of West of England
Coldharbour Lane
Frenchay Campus
Bristol
BS16 1QY
Tel:
Website:

Type	Award	Accreditation	For	Course Contact
F/T,(PT) SW	BSc(Hons) Product Design Technology	2006 - 2011	Membership	Ramin2.Amali@uwe.ac.uk
F/T,(PT) SW	BSc(Hons) Product Design and Innovation	2005-2007	Membership	Ramin2.Amali@uwe.ac.uk